800-748-1889

Decanting Pump Operation Video

Features

  • The sludge surface monitoring device prevents unexpected inflow of sludge and helps the pump solely discharge supernatant liquid.
  • A float makes the pump particularly useful for the application where the water level fluctuates widely.
  • An incorporated control circuit automatically stops operation upon receiving warning signals from the photosensor which would detect a water level drop to near the sludge interfaces layer.
  • The sensor surfaces are automatically washed with pressurized water to be kept clean for perfect monitoring.

 
Applications

  • Discharging supernatant liquid in SBR
  • Discharging supernatant liquid at facility where such process is required.

$   6,647.00
$   7,013.00
$   6,711.00
$   7,109.00
$ 12,700.00
$ 10,696.00
$ 15,542.00

115 or 230 V
208-230 or 460 V
115 or 230 V

208-230 or 460 V

115 or 230 V
208-230 or 460 V
208-230 or 460 V

                                                                                                  The sludge surface monitoring mechanism used in the FHP pump                                                                                                            ensures that only supernatant water is discharged without any                                                                                                                  entrapment of sediments. Applications are numerous in sewage                                                                                                              treatment, industrial waste water treatment and agriculture. The FHP                                                                                                      pump could even be used to draw decanted river water from a settling                                                                                                    pond.

• Installed in a decanting pit, the FHP pump goes up and down with the liquid, It can suck clear water from between the sludge at the bottom and foam or floating debris at the surface. Once switched on, it will start pumping if its inlet is in clear water. It will continue emptying the pit (and going down) until a photosensor warns of the water near the pump inlet becoming cloudy.

• The two lenses of the photosensor are flushed with clean water at a regular interval to keep them clean.

• The installation is sturdy enough for pits in which incoming flow can be violent.

• There are no non-ferrous materials in contact with water.

tsurumi FHP series DECANTING pumpS

CALL 800 748-1889 FOR ASSISTANCE ​IN SIZING YOUR APPLICATION.

1/3 HP
1/3 HP
1/2 HP
1/2 HP
1 HP
1 HP
2 HP

"MAP" PRICING

1 PH
3 PH
1 PH
3 PH
1 PH
3 PH

3 PH

FHP - Decanting Pumps